ChanServ commands

คำสั่งและการใช้งาน ChanServ

  • HELP 
    	ChanServ allows you to register and control various
	aspects of channels.  ChanServ can often prevent
	malicious users from "taking over" channels by limiting
	who is allowed channel operator privileges.  Available
	commands are listed below; to use them, type
	/msg ChanServ command.  For more information on a
	specific command, type /msg ChanServ HELP command.
  • EXPIRES 
    	Note that any channel which is not used for %d days
	(i.e. which no user on the channel's access list enters
	for that period of time) will be automatically dropped.
  • REGISTER 
    	Syntax: /msg ChanServ REGISTER channel password description
 
	Syntax: REGISTER channel password description
	Registers a channel in the ChanServ database.  In order
	to use this command, you must first be a channel operator
	on the channel you're trying to register.  The password
	is used with the IDENTIFY command to allow others to
	make changes to the channel settings at a later time.
	The last parameter, which must be included, is a
	general description of the channel's purpose.
	When you register a channel, you are recorded as the
	"founder" of the channel.  The channel founder is allowed
	to change all of the channel settings for the channel;
	ChanServ will also automatically give the founder
	channel-operator privileges when s/he enters the channel.
	See the ACCESS command (/msg ChanServ HELP ACCESS) for
	information on giving a subset of these privileges to
	other channel users.
	NOTICE: In order to register a channel, you must have
	first registered your nickname.  If you haven't,
	/msg ChanServ HELP for information on how to do so.
  • IDENTIFY 
    	Syntax: /msg ChanServ IDENTIFY channel password
 
	Syntax: IDENTIFY channel password
	Authenticates you to ChanServ as the founder of the given
	channel.  Many commands require you to use this command
	before using them.  The password should be the same one
	you sent with the REGISTER command.
  • LOGOUT 
    	Syntax: /msg ChanServ LOGOUT channel nickname
 
	Syntax: LOGOUT channel nickname
	This command will log the selected nickname out meaning they
	would have to reidentify themselves to regain their access.
	If you are the founder of the channel, you can log out anybody,
	else you can only log out yourself.
  • DROP 
    	Syntax: /msg ChanServ DROP channel
 
	Syntax: DROP channel
	Unregisters the named channel.  Can only be used by
	channel founder, who must use the IDENTIFY command first.
  • SET 
    	Syntax: /msg ChanServ SET channel option parameters
 
	Syntax: SET channel option parameters
	Allows the channel founder to set various channel options
	and other information.
	Available options:
	    FOUNDER       Set the founder of a channel
	    SUCCESSOR     Set the successor for a channel
	    PASSWORD      Set the founder password
	    DESC          Set the channel description
	    URL           Associate a URL with the channel
	    EMAIL         Associate an E-mail address with the channel
	    ENTRYMSG      Set a message to be sent to users when they
	                     enter the channel
	    BANTYPE       Set how Services make bans on the channel
	    MLOCK         Lock channel modes on or off
	    KEEPTOPIC     Retain topic when channel is not in use
	    OPNOTICE      Send a notice when OP/DEOP commands are used
	    PEACE         Regulate the use of critical commands
	    PRIVATE       Hide channel from LIST command
	    RESTRICTED    Restrict access to the channel
	    SECURE        Activate ChanServ security features
	    SECUREOPS     Stricter control of chanop status
	    SECUREFOUNDER Stricter control of channel founder status
	    SIGNKICK      Sign kicks that are done with KICK command
	    TOPICLOCK     Topic can only be changed with TOPIC
	    XOP           Toggle the user privilege system
	Type /msg ChanServ HELP SET option for more information on a
	particular option.
  • SET FOUNDER 
    	Syntax: /msg ChanServ SET channel FOUNDER nick
 
	Syntax: SET channel FOUNDER nick
	Changes the founder of a channel.  The new nickname must
	be a registered one.
  • SET SUCCESSOR 
    	Syntax: /msg ChanServ SET channel SUCCESSOR nick
 
	Syntax: SET channel SUCCESSOR nick
	Changes the successor of a channel.  If the founder's
	nickname expires or is dropped while the channel is still
	registered, the successor will become the new founder of the
	channel.  However, if the successor already has too many
	channels registered (%d), the channel will be dropped
	instead, just as if no successor had been set.  The new
	nickname must be a registered one.
  • SET PASSWORD 
    	Syntax: /msg ChanServ SET channel PASSWORD password
 
	Syntax: SET channel PASSWORD password
	Sets the password used to identify as the founder of the
	channel.
  • SET DESC 
    	Syntax: /msg ChanServ SET channel DESC description
 
	Syntax: SET channel DESC description
	Sets the description for the channel, which shows up with
	the LIST and INFO commands.
  • SET URL 
    	Syntax: /msg ChanServ SET channel URL [url]
 
	Syntax: SET channel URL [url]
	Associates the given URL with the channel.  This URL will
	be displayed whenever someone requests information on the
	channel with the INFO command.  If no parameter is given,
	deletes any current URL for the channel.
  • SET EMAIL 
    	Syntax: /msg ChanServ SET channel EMAIL [address]
 
	Syntax: SET channel EMAIL [address]
	Associates the given E-mail address with the channel.
	This address will be displayed whenever someone requests
	information on the channel with the INFO command.  If no
	parameter is given, deletes any current E-mail address for
	the channel.
  • SET ENTRYMSG 
    	Syntax: /msg ChanServ SET channel ENTRYMSG [message]
 
	Syntax: SET channel ENTRYMSG [message]
	Sets the message which will be sent via /notice to users
	when they enter the channel.  If no parameter is given,
	causes no message to be sent upon entering the channel.
  • SET BANTYPE 
    	Syntax: /msg ChanServ SET channel BANTYPE bantype
 
	Syntax: SET channel BANTYPE bantype
	Sets the ban type that will be used by services whenever
	they need to ban someone from your channel.
	bantype is a number between 0 and 3 that means:
	0: ban in the form *!user@host
	1: ban in the form *!*user@host
	2: ban in the form *!*@host
	3: ban in the form *!*user@*.domain
  • SET KEEPTOPIC 
    	Syntax: /msg ChanServ SET channel KEEPTOPIC {ON | OFF}
 
	Syntax: SET channel KEEPTOPIC {ON | OFF}
	Enables or disables the topic retention option for a
	channel.  When topic retention is set, the topic for the
	channel will be remembered by ChanServ even after the
	last user leaves the channel, and will be restored the
	next time the channel is created.
  • SET TOPICLOCK 
    	Syntax: /msg ChanServ SET channel TOPICLOCK {ON | OFF}
 
	Syntax: SET channel TOPICLOCK {ON | OFF}
	Enables or disables the topic lock option for a channel.
	When topic lock is set, ChanServ will not allow the
	channel topic to be changed except via the TOPIC
	command.
  • SET MLOCK 
    	Syntax: /msg ChanServ SET channel MLOCK modes
 
	Syntax: SET channel MLOCK modes
	Sets the mode-lock parameter for the channel. ChanServ
	allows you to define certain channel modes to be always
	on, off or free to be either on or off.
	The modes parameter is constructed exactly the same way
	as a /MODE command; that is, modes followed by a + are
	locked on, and modes followed by a - are locked off. Note,
	however, that unlike the /MODE command, each use of
	SET MLOCK will remove all modes previously locked before
	setting the new!
	Warning:  If you set a mode-locked key, as in the second
	example below, you should also set the RESTRICTED option for
	the channel (see HELP SET RESTRICTED), or anyone entering
	the channel when it is empty will be able to see the key!
	Examples:
	    SET #channel MLOCK +nt-iklps
	        Forces modes n and t on, and modes i, k, l, p, and
	        s off.  Mode m is left free to be either on or off.
	    SET #channel MLOCK +knst-ilmp my-key
	        Forces modes k, n, s, and t on, and modes i, l, m,
	        and p off.  Also forces the channel key to be
	        "my-key".
	    SET #channel MLOCK +
	        Removes the mode lock; all channel modes are free
	        to be either on or off.
  • SET PEACE 
    	Syntax: /msg ChanServ SET channel PEACE {ON | OFF}
 
	Syntax: SET channel PEACE {ON | OFF}
	Enables or disables the peace option for a channel.
	When peace is set, a user won't be able to kick,
	ban or remove a channel status of a user that has
	a level superior or equal to his via ChanServ commands.
  • SET PRIVATE 
    	Syntax: /msg ChanServ SET channel PRIVATE {ON | OFF}
 
	Syntax: SET channel PRIVATE {ON | OFF}
	Enables or disables the private option for a channel.
	When private is set, a /msg ChanServ LIST will not
	include the channel in any lists.
  • SET RESTRICTED 
    	Syntax: /msg ChanServ SET channel RESTRICTED {ON | OFF}
 
	Syntax: SET channel RESTRICTED {ON | OFF}
	Enables or disables the restricted access option for a
	channel.  When restricted access is set, users not on
	the access list will instead be kicked and banned from the channel.
  • SET SECURE 
    	Syntax: /msg ChanServ SET channel SECURE {ON | OFF}
 
	Syntax: SET channel SECURE {ON | OFF}
	Enables or disables ChanServ's security features for a
	channel.  When SECURE is set, only users who have
	registered their nicknames with ChanServ and IDENTIFY'd
	with their password will be given access to the channel
	as controlled by the access list.
  • SET SECUREOPS 
    	Syntax: /msg ChanServ SET channel SECUREOPS {ON | OFF}
 
	Syntax: SET channel SECUREOPS {ON | OFF}
	Enables or disables the secure ops option for a channel.
	When secure ops is set, users who are not on the userlist
	will not be allowed chanop status.
  • SET SECUREFOUNDER 
    	Syntax: /msg ChanServ SET channel SECUREFOUNDER {ON | OFF}
 
	Syntax: SET channel SECUREFOUNDER {ON | OFF}
	Enables or disables the secure founder option for a channel.
	When secure founder is set, only the real founder will be
	able to drop the channel, change its password, its founder and its
	successor, and not those who are IDENTIFY'd with ChanServ.
  • SET SIGNKICK 
    	Syntax: /msg ChanServ SET channel SIGNKICK {ON | LEVEL | OFF}
 
	Syntax: SET channel SIGNKICK {ON | LEVEL | OFF}
	Enables or disables signed kicks for a
	channel.  When SIGNKICK is set, kicks issued with
	ChanServ KICK command will have the nick that used the
	command in their reason.
	If you use LEVEL, those who have a level that is superior
	or equal to the SIGNKICK level on the channel won't have their
	kicks signed. See /msg ChanServ HELP LEVELS for more information.
  • SET XOP 
    	Syntax: /msg ChanServ SET channel XOP {ON | OFF}
 
	Syntax: SET channel XOP {ON | OFF}
	Enables or disables the xOP lists system for a channel.
	When XOP is set, you have to use the AOP/SOP/VOP
	commands in order to give channel privileges to
	users, else you have to use the ACCESS command.
	Technical Note: when you switch from access list to xOP
	lists system, your level definitions and user levels will be
	changed, so you won't find the same values if you
	switch back to access system!
	You should also check that your users are in the good xOP
	list after the switch from access to xOP lists, because the
	guess is not always perfect... in fact, it is not recommended
	to use the xOP lists if you changed level definitions with
	the LEVELS command.
	Switching from xOP lists system to access list system
	causes no problem though.
  • SET OPNOTICE 
    	Syntax: /msg ChanServ SET channel OPNOTICE {ON | OFF}
 
	Syntax: SET channel OPNOTICE {ON | OFF}
	Enables or disables the op-notice option for a channel.
	When op-notice is set, ChanServ will send a notice to the
	channel whenever the OP or DEOP commands are used for a user
	in the channel.
  • AOP 
    	Syntax: /msg ChanServ AOP channel ADD nick
 
	Syntax: AOP channel ADD nick
	        AOP channel DEL {nick | entry-num | list}
	        AOP channel LIST [mask | list]
	        AOP channel CLEAR
	Maintains the AOP (AutoOP) list for a channel. The AOP
	list gives users the right to be auto-opped on your channel,
	to unban or invite themselves if needed, to have their
	greet message showed on join, and so on.
	The AOP ADD command adds the given nickname to the
	AOP list.
	The AOP DEL command removes the given nick from the
	AOP list.  If a list of entry numbers is given, those
	entries are deleted.  (See the example for LIST below.)
	The AOP LIST command displays the AOP list.  If
	a wildcard mask is given, only those entries matching the
	mask are displayed.  If a list of entry numbers is given,
	only those entries are shown; for example:
	   AOP #channel LIST 2-5,7-9
	      Lists AOP entries numbered 2 through 5 and
	      7 through 9.
	The AOP CLEAR command clears all entries of the
	AOP list.
	The AOP ADD and AOP DEL commands are limited to
	SOPs or above, while the AOP CLEAR command can only
	be used by the channel founder. However, any user on the
	AOP list may use the AOP LIST command.
	This command may have been disabled for your channel, and
	in that case you need to use the access list. See
	/msg ChanServ HELP ACCESS for information about the access list,
	and /msg ChanServ HELP SET XOP to know how to toggle between
	the access list and xOP list systems.
  • HOP 
    	Syntax: /msg ChanServ HOP channel ADD nick
 
	Syntax: HOP channel ADD nick
	        HOP channel DEL {nick | entry-num | list}
	        HOP channel LIST [mask | list]
	        HOP channel CLEAR
	Maintains the HOP (HalfOP) list for a channel. The HOP
	list gives users the right to be auto-halfopped on your
	channel.
	The HOP ADD command adds the given nickname to the
	HOP list.
	The HOP DEL command removes the given nick from the
	HOP list.  If a list of entry numbers is given, those
	entries are deleted.  (See the example for LIST below.)
	The HOP LIST command displays the HOP list.  If
	a wildcard mask is given, only those entries matching the
	mask are displayed.  If a list of entry numbers is given,
	only those entries are shown; for example:
	   HOP #channel LIST 2-5,7-9
	      Lists HOP entries numbered 2 through 5 and
	      7 through 9.
	The HOP CLEAR command clears all entries of the
	HOP list.
	The HOP ADD, HOP DEL and HOP LIST commands are
	limited to AOPs or above, while the HOP CLEAR command
	can only be used by the channel founder.
	This command may have been disabled for your channel, and
	in that case you need to use the access list. See
	/msg ChanServ HELP ACCESS for information about the access list,
	and /msg ChanServ HELP SET XOP to know how to toggle between
	the access list and xOP list systems.
  • SOP 
    	Syntax: /msg ChanServ SOP channel ADD nick
 
	Syntax: SOP channel ADD nick
	        SOP channel DEL {nick | entry-num | list}
	        SOP channel LIST [mask | list]
	        SOP channel CLEAR
	Maintains the SOP (SuperOP) list for a channel. The SOP
	list gives users all rights given by the AOP list, and adds
	those needed to use the AutoKick and the BadWords lists,
	to send and read channel memos, and so on.
	The SOP ADD command adds the given nickname to the
	SOP list.
	The SOP DEL command removes the given nick from the
	SOP list.  If a list of entry numbers is given, those
	entries are deleted.  (See the example for LIST below.)
	The SOP LIST command displays the SOP list.  If
	a wildcard mask is given, only those entries matching the
	mask are displayed.  If a list of entry numbers is given,
	only those entries are shown; for example:
	   SOP #channel LIST 2-5,7-9
	      Lists AOP entries numbered 2 through 5 and
	      7 through 9.
	The SOP CLEAR command clears all entries of the
	SOP list.
	The SOP ADD, SOP DEL and SOP CLEAR commands are
	limited to the channel founder. However, any user on the
	AOP list may use the SOP LIST command.
	This command may have been disabled for your channel, and
	in that case you need to use the access list. See
	/msg ChanServ HELP ACCESS for information about the access list,
	and /msg ChanServ HELP SET XOP to know how to toggle between
	the access list and xOP list systems.
  • VOP 
    	Syntax: /msg ChanServ VOP channel ADD nick
 
	Syntax: VOP channel ADD nick
	        VOP channel DEL {nick | entry-num | list}
	        VOP channel LIST [mask | list]
	        VOP channel CLEAR
	Maintains the VOP (VOicePeople) list for a channel.
	The VOP list allows users to be auto-voiced and to voice
	themselves if they aren't.
	The VOP ADD command adds the given nickname to the
	VOP list.
	The VOP DEL command removes the given nick from the
	VOP list.  If a list of entry numbers is given, those
	entries are deleted.  (See the example for LIST below.)
	The VOP LIST command displays the VOP list.  If
	a wildcard mask is given, only those entries matching the
	mask are displayed.  If a list of entry numbers is given,
	only those entries are shown; for example:
	   VOP #channel LIST 2-5,7-9
	      Lists VOP entries numbered 2 through 5 and
	      7 through 9.
	The VOP CLEAR command clears all entries of the
	VOP list.
	The VOP ADD, VOP DEL and VOP LIST commands are
	limited to AOPs or above, while the VOP CLEAR command
	can only be used by the channel founder.
	This command may have been disabled for your channel, and
	in that case you need to use the access list. See
	/msg ChanServ HELP ACCESS for information about the access list,
	and /msg ChanServ HELP SET XOP to know how to toggle between
	the access list and xOP list systems.
  • ACCESS 
    	Syntax: /msg ChanServ ACCESS channel ADD nick level
 
	Syntax: ACCESS channel ADD nick level
	        ACCESS channel DEL {nick | entry-num | list}
	        ACCESS channel LIST [mask | list]
	        ACCESS channel CLEAR
	Maintains the access list for a channel.  The access
	list specifies which users are allowed chanop status or
	access to ChanServ commands on the channel.  Different
	user levels allow for access to different subsets of
	privileges; /msg ChanServ HELP ACCESS LEVELS for more
	specific information.  Any nick not on the access list has
	a user level of 0.
	The ACCESS ADD command adds the given nickname to the
	access list with the given user level; if the nick is
	already present on the list, its access level is changed to
	the level specified in the command.  The level specified
	must be less than that of the user giving the command, and
	if the nick is already on the access list, the current
	access level of that nick must be less than the access level
	of the user giving the command.
	The ACCESS DEL command removes the given nick from the
	access list.  If a list of entry numbers is given, those
	entries are deleted.  (See the example for LIST below.)
	The ACCESS LIST command displays the access list.  If
	a wildcard mask is given, only those entries matching the
	mask are displayed.  If a list of entry numbers is given,
	only those entries are shown; for example:
	   ACCESS #channel LIST 2-5,7-9
	      Lists access entries numbered 2 through 5 and
	      7 through 9.
	The ACCESS CLEAR command clears all entries of the
	access list.
  • ACCESS LEVELS 
    	User access levels
	By default, the following access levels are defined:
	   Founder   Full access to ChanServ functions; automatic
	                     opping upon entering channel.  Note
	                     that only one person may have founder
	                     status (it cannot be given using the
	                     ACCESS command).
	        10   Access to AKICK command; automatic opping.
	         5   Automatic opping.
	         3   Automatic voicing.
	         0   No special privileges; can be opped by other
	                     ops (unless secure-ops is set).
	        <0   May not be opped.
	These levels may be changed, or new ones added, using the
	LEVELS command; type /msg ChanServ HELP LEVELS for
	information.
  • AKICK 
    	Syntax: /msg ChanServ AKICK channel ADD {nick | mask} [reason]
 
	Syntax: AKICK channel ADD {nick | mask} [reason]
	        AKICK channel STICK mask
	        AKICK channel UNSTICK mask
	        AKICK channel DEL {nick | mask | entry-num | list}
	        AKICK channel LIST [mask | entry-num | list]
	        AKICK channel VIEW [mask | entry-num | list]
	        AKICK channel ENFORCE
	        AKICK channel CLEAR
	Maintains the AutoKick list for a channel.  If a user
	on the AutoKick list attempts to join the channel,
	ChanServ will ban that user from the channel, then kick
	the user.
	The AKICK ADD command adds the given nick or usermask
	to the AutoKick list.  If a reason is given with
	the command, that reason will be used when the user is
	kicked; if not, the default reason is "You have been
	banned from the channel".
	When akicking a registered nick the nickserv account
	will be added to the akick list instead of the mask.
	All users within that nickgroup will then be akicked.
	The AKICK STICK command permanently bans the given mask
	on the channel. If someone tries to remove the ban, ChanServ
	will automatically set it again. You can't use it for
	registered nicks.
	The AKICK UNSTICK command cancels the effect of the
	AKICK STICK command, so you'll be able to unset the
	ban again on the channel.
	The AKICK DEL command removes the given nick or mask
	from the AutoKick list.  It does not, however, remove any
	bans placed by an AutoKick; those must be removed
	manually.
	The AKICK LIST command displays the AutoKick list, or
	optionally only those AutoKick entries which match the
	given mask.
	The AKICK VIEW command is a more verbose version of
	AKICK LIST command.
	The AKICK ENFORCE command causes ChanServ to enforce the
	current AKICK list by removing those users who match an
	AKICK mask.
	The AKICK CLEAR command clears all entries of the
	akick list.
  • LEVELS 
    	Syntax: /msg ChanServ LEVELS channel SET type level
 
	Syntax: LEVELS channel SET type level
	        LEVELS channel {DIS | DISABLE} type
	        LEVELS channel LIST
	        LEVELS channel RESET
	The LEVELS command allows fine control over the meaning of
	the numeric access levels used for channels.  With this
	command, you can define the access level required for most
	of ChanServ's functions.  (The SET FOUNDER and SET PASSWORD
	commands, as well as this command, are always restricted to
	the channel founder.)
	LEVELS SET allows the access level for a function or group of
	functions to be changed.  LEVELS DISABLE (or DIS for short)
	disables an automatic feature or disallows access to a
	function by anyone other than the channel founder.
	LEVELS LIST shows the current levels for each function or
	group of functions.  LEVELS RESET resets the levels to the
	default levels of a newly-created channel (see
	HELP ACCESS LEVELS).
	For a list of the features and functions whose levels can be
	set, see HELP LEVELS DESC.
  • INFO 
    	Syntax: /msg ChanServ INFO channel [ALL]
 
	Syntax: INFO channel [ALL]
	Lists information about the named registered channel,
	including its founder, time of registration, last time
	used, description, and mode lock, if any. If ALL is
	specified, the entry message and successor will also
	be displayed.
	By default, the ALL option is limited to those with
	founder access on the channel.
  • LIST 
    	Syntax: /msg ChanServ LIST pattern
 
	Syntax: LIST pattern
	Lists all registered channels matching the given pattern.
	(Channels with the PRIVATE option set are not listed.)
	Note that a preceding '#' specifies a range, channel names
	are to be written without '#'.
  • OP 
    	Syntax: /msg ChanServ OP [#channel [nick]]
 
	Syntax: OP [#channel [nick]]
	Ops a selected nick on a channel. If nick is not given,
	it will op you. If channel and nick are not given,
	it will op you on all channels you're on, provided you
	have the rights to.
	By default, limited to AOPs or those with level 5 access
	and above on the channel.
  • DEOP 
    	Syntax: /msg ChanServ DEOP [#channel [nick]]
 
	Syntax: DEOP [#channel [nick]]
	Deops a selected nick on a channel. If nick is not given,
	it will deop you. If channel and nick are not given,
	it will deop you on all channels you're on, provided you
	have the rights to.
	By default, limited to AOPs or those with level 5 access
	and above on the channel.
  • VOICE 
    	Syntax: /msg ChanServ VOICE [#channel [nick]]
 
	Syntax: VOICE [#channel [nick]]
	Voices a selected nick on a channel. If nick is not given,
	it will voice you. If channel and nick are not given,
	it will voice you on all channels you're on, provided you
	have the rights to.
	By default, limited to AOPs or those with level 5 access
	and above on the channel, or to VOPs or those with level 3
	and above for self voicing.
  • DEVOICE 
    	Syntax: /msg ChanServ DEVOICE [#channel [nick]]
 
	Syntax: DEVOICE [#channel [nick]]
	Devoices a selected nick on a channel. If nick is not given,
	it will devoice you. If channel and nick are not given,
	it will devoice you on all channels you're on, provided you
	have the rights to.
	By default, limited to AOPs or those with level 5 access
	and above on the channel, or to VOPs or those with level 3
	and above for self devoicing.
  • HALFOP 
    	Syntax: /msg ChanServ HALFOP [#channel [nick]]
 
	Syntax: HALFOP [#channel [nick]]
	Halfops a selected nick on a channel. If nick is not given,
	it will halfop you. If channel and nick are not given,
	it will halfop you on all channels you're on, provided you
	have the rights to.
	By default, limited to AOPs and those with level 5 access
	and above on the channel, or to HOPs or those with level 4
	and above for self halfopping.
  • DEHALFOP 
    	Syntax: /msg ChanServ DEHALFOP [#channel [nick]]
 
	Syntax: DEHALFOP [#channel [nick]]
	Dehalfops a selected nick on a channel. If nick is not given,
	it will dehalfop you. If channel and nick are not given,
	it will dehalfop you on all channels you're on, provided you
	have the rights to.
	By default, limited to AOPs and those with level 5 access
	and above on the channel, or to HOPs or those with level 4
	and above for self dehalfopping.
  • PROTECT 
    	Syntax: /msg ChanServ PROTECT [#channel [nick]]
 
	Syntax: PROTECT [#channel [nick]]
	Protects a selected nick on a channel. If nick is not given,
	it will protect you. If channel and nick are not given,
	it will protect you on all channels you're on, provided you
	have the rights to.
	By default, limited to the founder, or to SOPs or those with
	level 10 and above on the channel for self protecting.
  • DEPROTECT 
    	Syntax: /msg ChanServ DEPROTECT [#channel [nick]]
 
	Syntax: DEPROTECT [#channel [nick]]
	Deprotects a selected nick on a channel. If nick is not given,
	it will deprotect you. If channel and nick are not given,
	it will deprotect you on all channels you're on, provided you
	have the rights to.
	By default, limited to the founder, or to SOPs or those with
	level 10 and above on the channel for self deprotecting.
  • OWNER 
    	Syntax: /msg ChanServ OWNER [#channel]
 
	Syntax: OWNER [#channel]
	Gives you owner status on channel. If channel is not
	given, it will give you owner status on all channels you're
	on, provided you have the rights to.
	Limited to those with founder access on the channel.
  • DEOWNER 
    	Syntax: /msg ChanServ DEOWNER [#channel]
 
	Syntax: DEOWNER [#channel]
	Removes your owner status on channel. If channel is
	not given, it will remove your owner status on all channels
	you're on, provided you have the rights to.
	Limited to those with founder access on the channel.
  • INVITE 
    	Syntax: /msg ChanServ INVITE channel
 
	Syntax: INVITE channel
	Tells ChanServ to invite you into the given channel.
	By default, limited to AOPs or those with level 5 and above
	on the channel.
  • UNBAN 
    	Syntax: /msg ChanServ UNBAN channel
 
	Syntax: UNBAN channel
	Tells ChanServ to remove all bans preventing you from
	entering the given channel.
	By default, limited to AOPs or those with level 5 and above
	on the channel.
  • KICK 
    	Syntax: /msg ChanServ KICK [#channel [nick [reason]]]
 
	Syntax: KICK [#channel [nick [reason]]]
	Kicks a selected nick on a channel. If nick is not given,
	it will kick you. If channel and nick are not given,
	it will kick you on all channels you're on, provided you
	have the rights to.
	By default, limited to AOPs or those with level 5 access
	and above on the channel.
  • BAN 
    	Syntax: /msg ChanServ BAN [#channel [nick [reason]]]
 
	Syntax: BAN [#channel [nick [reason]]]
	Bans a selected nick on a channel. If nick is not given,
	it will ban you. If channel and nick are not given,
	it will ban you on all channels you're on, provided you
	have the rights to.
	By default, limited to AOPs or those with level 5 access
	and above on the channel.
  • TOPIC 
    	Syntax: /msg ChanServ TOPIC channel [topic]
 
	Syntax: TOPIC channel [topic]
	Causes ChanServ to set the channel topic to the one
	specified. If topic is not given, then an empty topic
	is set. This command is most useful in conjunction
	with SET TOPICLOCK. See /msg ChanServ HELP SET TOPICLOCK
	for more information.
	By default, limited to those with founder access on the
	channel.
  • CLEAR 
    	Syntax: /msg ChanServ CLEAR channel what
 
	Syntax: CLEAR channel what
	Tells ChanServ to clear certain settings on a channel.  what
	can be any of the following:
	     MODES    Resets all modes on the channel (i.e. clears
	                  modes i,k,l,m,n,p,s,t).
	     BANS     Clears all bans on the channel.
	     EXCEPTS  Clears all excepts on the channel.
	     INVITES  Clears all invites on the channel.
	     OPS      Removes channel-operator status (mode +o) from
	                  all channel operators.
	     HOPS     Removes channel-halfoperator status (mode +h) from
	                  all channel halfoperators, if supported.
	     VOICES   Removes "voice" status (mode +v) from anyone
	                  with that mode set.
	     USERS    Removes (kicks) all users from the channel.
	By default, limited to those with founder access on the
	channel.
  • GETKEY 
    	Syntax: /msg ChanServ GETKEY channel
 
	Syntax: GETKEY channel
	Returns the key of the given channel. This is a command
	mainly intended to be used by bots and/or scripts, so
	the output is in the following way:
	KEY  
	key is "NO KEY" if no key is set.
  • SENDPASS 
    	Syntax: /msg ChanServ SENDPASS channel
 
	Syntax: SENDPASS channel
	Send the password of the given channel to the e-mail address
	set in the founder's nickname record. This command is really
	useful to deal with lost passwords.
	May be limited to IRC operators on certain networks.
	This command is unavailable when encryption is enabled.